This and That

Not doing it for a year or two it was nice for the first try since then to come thru.

Pick 3 7-0-4 Tue, Nov 29, 2005

I messed with v-tracs for exact position about a year or two ago. Can not remember. Gave it up to look at other things.
V-tracs are great once understood.
Anyhow these are the lottery numbers I come up with for straight play. Of course I sorted the wheel to the ones I wanted as I use another daily digit lottery number tracking to go with it.
I like my straight plays >LOL<

209-704-109-709-204

WEEELLLLL  SEEEEEEEEEee

Sat I started running lumber thru the planer and it stopped cold. Checked  out the electrical up to the motor. Thats o'k. Brushes o'k in motor. Need to send that to the shop.

Looked for my cell phone this am. Thats gone. Nowhere in the house. Last I had it was in the van Sat and did not lockup at store. Looks like someone took it out of the van. If they did I hope they enjoy the pawn money.

T-T-T- puzzle
fill in the blanks not having a duplicate
number in the t-t-t. Your numbers in the T-T-T squares must match the answer to win
answer tomorrow
[-][2][-]___[7][-][6]___[2][5][-]
[7][8][-]___[-][-][-]___[-][-][8]
[-][-][6]___[-][3][2]___[1][-][-]

[9][-][-]___[-][-][9]___[-][6][-]
[-][0][-]___[2][6][-]___[4][-][-]
[2][-][6]___[7][-][-]___[-][8][2]

First off I said back in an earlier pick 4 post to watch for the 0137 combo as it looked like it was coming.
It came tonight as 3170 11/22 eve. I had forgotten about it and did not put it as a keepr play. Missed it.
Stickin with my 23 pairs yet that I posted.

On to the pick 3 from the 4 draws. Never really looked at it before but this is the results from 11/01 to 11/22.
Nothing to jump up and down about. Using the draws from the previous day to the next pick 3 draws are some hits that were in one of the last 2 pick 4 numbers drawn. Looks like it may need tweeking a little bit to make it work. Use the last 2 pick 4 draws and wheel the numbers somehow to get the next 2 pick 3 draws.

November 1, 2005   [ Midday ] 7 9 9 1
November 1, 2005 [ Evening ] 3 7 1 1
November2, 2005   [ Midday ] 1 0 6
November2, 2005 [ Evening ] 1 7 0

November 2, 2005   [ Midday ] 7 0 2 9
November 2, 2005 [ Evening ] 9 8 5 0
November3, 2005   [ Midday ] 8 8 4
November3, 2005 [ Evening ] 8 3 2

November 3, 2005   [ Midday ] 7 7 6 5
November 3, 2005 [ Evening ] 3 4 6 4
November4, 2005   [ Midday ] 2 5 9
November4, 2005 [ Evening ] 3 7 6

November 4, 2005   [ Midday ] 4 3 7 1
November 4, 2005 [ Evening ] 6 8 2 0
November5, 2005   [ Midday ] 3 0 4
November5, 2005 [ Evening ] 2 0 2

November 5, 2005   [ Midday ] 7 0 1 5
November 5, 2005 [ Evening ] 1 5 6 9
November6, 2005 [ Evening ] 9 8 1

November 6, 2005 [ Evening ] 1 2 7 6
November7, 2005   [ Midday ] 3 2 1
November7, 2005 [ Evening ] 9 7 8

November 7, 2005   [ Midday ] 5 1 6 8
November 7, 2005 [ Evening ] 3 0 9 1
November8, 2005   [ Midday ] 1 5 6____hit
November8, 2005 [ Evening ] 2 7 8

November 8, 2005   [ Midday ] 3 9 3 1
November 8, 2005 [ Evening ] 4 4 9 1
November9, 2005   [ Midday ] 5 0 8
November9, 2005 [ Evening ] 9 4 1____hit

November 9, 2005   [ Midday ] 2 2 2 6
November 9, 2005 [ Evening ] 2 6 5 6
November10, 2005 [ Midday ] 2 5 4
November10, 2005 [ Evening ] 7 1 9

November 10, 2005 [ Midday ] 7 1 6 3
November 10, 2005 [ Evening ] 0 6 7 2
November11, 2005 [ Midday ] 2 0 8
November11, 2005 [ Evening ] 6 8 5

November 11, 2005 [ Midday ] 2 6 7 6
November 11, 2005 [ Evening ] 5 1 0 1
November12, 2005 [ Midday ] 1 2 9
November12, 2005 [ Evening ] 4 1 7

November 12, 2005 [ Midday ] 7 0 7 8
November 12, 2005 [ Evening ] 2 6 4 0
November13, 2005 [ Evening ] 2 3 3

November 13, 2005 [ Evening ] 4 2 4 4
November14, 2005 [ Midday ] 2 6 1
November14, 2005 [ Evening ] 9 1 5

November 14, 2005 [ Midday ] 4 9 1 0
November 14, 2005 [ Evening ] 1 6 5 9
November15, 2005 [ Midday ] 5 0 5
November15, 2005 [ Evening ] 8 5 9

November 15, 2005 [ Midday ] 5 6 3 4
November 15, 2005 [ Evening ] 6 4 8 2
November16, 2005 [ Midday ] 6 0 2
November16, 2005 [ Evening ] 1 9 3

November 16, 2005 [ Midday ] 9 6 9 5
November 16, 2005 [ Evening ] 1 9 6 3
November17, 2005 [ Midday ] 1 4 2
November17, 2005 [ Evening ] 5 9 6____hit

November 17, 2005 [ Midday ] 7 6 2 9
November 17, 2005 [ Evening ] 8 3 4 9
November18, 2005 [ Midday ] 7 1 6
November18, 2005 [ Evening ] 4 7 4

November 18, 2005 [ Midday ] 1 1 7 6
November 18, 2005 [ Evening ] 8 9 0 4
November19, 2005 [ Midday ] 4 8 3
November19, 2005 [ Evening ] 4 7 9

November 19, 2005 [ Midday ] 4 1 0 0
November 19, 2005 [ Evening ] 0 2 1 4
November20, 2005 [ Evening ] 0 2 9

November 20, 2005 [ Evening ] 9 9 8 1
November21, 2005 [ Midday ] 7 8 5
November21, 2005 [ Evening ] 0 1 2____hit

November 21, 2005 [ Midday ] 7 7 5 5
November 21, 2005 [ Evening ] 1 6 5 6
November22, 2005 [ Midday ] 1 6 5____hit
November22, 2005 [ Evening ] 0 0 4

November 22, 2005 [ Midday ] 4 8 4 9
November 22, 2005 [ Evening ] 3 1 7 0

Started about 11 am and finished around 5 pm.

Got all the panel boards finish planed to 1/2". Will finish planing the 13/16" lumber down to 3/4" finish after thanksgiving. Next step will be resawing and planing the edges to be same size on the board for width.

Had to clean the feed rollers on the planer quite a few times as the lumber still has a high pitch content in some of them yet after 200 years. Had to discard about 7 boards 3" x 16" as the pitch content was so concentrated in them. The lumber being used is antigue pine which is from a type of tree they get turpentine from.

Going to go work on my cash 5 for tomorrows draw. Have one set of filterd wheel which I have been playing for about the last 4 draws. Have ten lines in that one and will do another wheel with 10 lines.

May expand my cash 5 tracking to have the other positions connected. Have tracking now having 1&2, 2&3 ,3&4 & 4&5. Want to expand to 1&3, 1&4, 1&5, 2&4, 2&5, 3&5

This will give me the option to look for odd & even stuff.
May do some of them sometime this week.

Did not plane any lumber today.

Helped a neighbor run some 1 pc crown mould in a bedroom this a m. Run about 48 l/ft in about an 1 1/2.

Did not do much until 2:30 when I loaded the truck with the shavings and some scrap wood and took to recycling center as they call it now.  Use to call it the dump but they want the stuff sorted now. Got me a nice office chair while I was there that only had a small tear in the backrest. Use that for my smoke room instead of a hard stool.

Someone can furnish a house with a lot of the stuff they throw away in landfills. Had a buddy one time who was retired and use to salvage scrap metal and any antiques he could find. Done it to have something to do.

I have seen old bath wall cabinets sold for good money that we use to throw away for junk. Can not remember how many old claw foot tubs I have seen in the dump or taken to the scrap yard. Can have them redone if chipped and sell for over 500.00 these days. Have seen them used for watering throughs on farms too.

Before I went ahead and planed more panel boards to 7/16" I checked my biscuit cutter with the ones I had. HMMMM says I. I better make these boards for a finish thickness of 1/2". 3/8" finish is not thick enough says I.
I will use what little I have of 3/8" for the drawer lumber.
Planed out more of the stuff to finish 3/4" for the tops also.
Planed out the six legs to 1 1/4" square. Going to use four legs on the front of desk as I will have an opening for the my legs to fit in. The back I will have one leg in each corner with a continuous board the length of the table about 6" up on the legs. Will have a taper on the legs about 6" high. About a 1/4" taper. Will look for round metal adjusters to fit in the bottom of the legs.
still have more planing to do yet.
That large pile of 3 x 4 s has dwindled down quite a bit. A bit of wastage from cull lumber, [junk]
Planing takes out a lot of lumber by the time I plane it to size.
Have one trash can full and one 15 gallon leaf bag full of shavings already.
The lumber is looking good for the project.
until next weekend now.

Planed out most of the lumber for tops down to about 13/16". did not set planer for each board to size. Will go one more run thru on all the boards at the same time with planer set at 3/4".
I will have my table top and a top shelf that will rest on the top cabinets about 14" wide

Planed some of the panel boards down to 7/16" and will do a final cut down to 3/8" when I have all of them ready.

Will need to do a finish cut for width on the boards for final edging.

Still have a lot of planing to do yet.

Looks like I may have enough lumber for all of the Computer desk and top cabinets.

Will look similiar to a hoosier cabinet.

Going to make the table top about 48" long by about 28" deep.

Borrowed a planer/edger from a coworker. Going to run the lumber thru to the dimension needed for the table.
Have most of it sorted as to where I want it to go.

Gonna go with the same 12 lines I last posted in my blog.
Had 12 lines I did one time before and it took a little bit for them to come around. Had 4 of 5 in that set about 4 times.

Gettin my tickets with one line on each ticket if I hit multiple 4 of 5 again. Cash them at the store then instead of the redemption center.
Will need to spend money for gas if I hit 5 of 5 to get to redemption center.
Was wondering if they would send a limo to get there at their expense. Hate to spend that money for gas. >LOL<

Still using my system I had for some time.

Caught 2 boxes with 15 numbers today. May need to search for additional straight positions after I pull the numbers I keep.

Do not much like playing box bets. If it continues to do good I may just combo a few of the numbers. If you can make a profit with box bets it would seem a profit would be there with combo bets. Need to do the math on that one.

Still using the software of tracking by sorted position.
Still using by position filters.

Still trying to figure the winning combination.
It is like trying to crack a safe when you do not know the combination. >LOL<